世界*实验材料供应商 Flow Tech,Inc.上海金畔生物为其中国代理, Flow Tech,Inc.在一直是行业的*,一直为广大科研客户提供zui为的产品和服务,上海金畔生物一直秉承为中国科研客户带来的产品,的服务, Flow Tech,Inc.就是为了给广大科研客户带来更加完善的产品和服务,您的满意将是我们zui大的收获
Flow Tech,Inc.中国代理, Flow Tech,Inc.上海代理, Flow Tech,Inc.北京代理,Flow Tech,Inc.广东代理, Flow Tech,Inc.江苏代理Flow Tech,Inc.湖北代理,Flow Tech,Inc.天津,Flow Tech,Inc.黑龙江代理,Flow Tech,Inc.内蒙古代理,Flow Tech,Inc.吉林代理,Flow Tech,Inc.福建代理, Flow Tech,Inc.江苏代理, Flow Tech,Inc.浙江代理, Flow Tech,Inc.四川代理,
Flow Tech,Inc.是一家马萨诸塞州公司,于1996年从Boulder公司搬迁,我们能为您提供便利和专业的服务,在大多数情况下,您可以在收到后的一个工作日内发货。
MICROFIL®化合物设计用于在生理压力下填充和遮盖非生存动物和尸体后的微血管和其他空间。这一创新产品已经在美国和的高校,医院和其他研究机构使用了三十多年。
关于MICROFIL®
MICROFIL®化合物将在生理注射压力下填充和不透明非生存动物和死后组织的微血管和其他空间。连续闭合的血管系统本身可以通过注射或灌注技术流动。注射后,MICROFIL化合物固化形成脉管系统的三维铸型。
MICROFIL®MV系列化合物有五种不透射线的颜色以及透明度。MV系列化合物需要水杨酸甲酯或甘油清除顺序,由此清除溶液的折射率与组织的折射率相同。这允许对所选择的血管床进行显微镜检查。
MICROFIL®CP-101化合物适用于铸造腐蚀技术,用于填充大血管(大于100微米)。虽然CP-101化合物将填充毛细血管,但是当通过暴露于氢氧化钾溶液除去支持组织时,这些血管碎片。固化时,MICROFIL®CP-101是乳白色的白色。使用CP-101制作的铸件将无限期地保持其尺寸精度。
MICROFIL®化合物优于以前提供的橡胶注射材料的优势包括:
- *填充zui小的收缩,增强血管连续性,并在清除的制剂中产生一个生动的,光学清除的样品,允许研究微循环。
- 色彩多样性,在循环树中提供用于显微镜检查和照相插图的描绘。
MICROFIL® Products
MICROFIL® Silicone Rubber Injection Compounds
MV-112 | MV-117 | MV-120 | MV-122 | MV-130 | MV-132 | MV-Diluent |
可用的颜色
Kit | Weight | Color |
B | 1 lb. | One color |
C | 2 lbs. | One or two colors |
D | 1 gal. (8 lbs.) | One to four colors |
试剂盒重量基于MV-化合物和MV-稀释剂的组合重量,即。1磅 套装包含8盎司 的MV化合物和8盎司。的稀释剂。
免费提供充足的MV固化剂来固化试剂盒的内容物。
一磅重的试剂盒的体积约为400毫升。
MICROFIL® CP-101 For Cast Corrosion Preparations
Kit | Weight | Color |
CP-101 | 1 lb. | Milky |
Kit weight is based upon the weight of MICROFIL® CP-101 (16 oz.). Sufficient curing agents are supplied at no charge to cure the contents of the kit.
Curing System | Stannous octoate in combination with ethyl silicate. |
Mixing Directions | Cure is accomplished by mixing CP-101 with 5% ethyl silicate and 5% stannous octoate (by weight). Upon addition of curing agents, working time is approximay 45 minutes. |
Clearing Procedure | Either alcohol-methyl salicylate or glycerin may be employed. See more details. |
Corrosion Preparations | Potassium hydroxide may be used in studies where the vessels have a diameter of greater than 100 microns. |
Corrosion Clearing Procedure | Cast corrosion can be obtained as follows: After the casting material has been compley hardened, place the perfused organ in 20% potassium hydroxide or sodium hydroxide solution for several days. The cast should then be rinsed several times in water until all the tissue is removed. The casting time depends both on the concentration of the corrosive solution and on the tissue itself. Lung and heart tissue require 5-6 days in potassium hydroxide whereas bone and brain tissue may require 35% potassium hydroxide for up to 10 days. |
Advantages | MICROFIL CP-101 will maintain dimensional integrity on storage. There is no diluent in the system. |