tedpella非导电胶产品

tedpella非导电胶产品

 

使用
Lift-N-Press™标签将胶粘剂施加到样品架上
 

 

Lift-N-Press™标签

一种新的改进的粘合片,它由坚固,不导电,直径为1/2英寸(12.7毫米)的粘合剂薄膜组成,具有以下特性:

  • 适合1/2“ SEM销和气缸安装座
  • 平滑的背景
  • 高强度胶
  • 更好的颗粒检测
  • 胶粘剂仅25um厚
  • 易点胶辊
  • 保质期长

 

产品编号 描述 单元 价钱 订购/报价
16082 非导电Lift-N-Press™标签,卷/ 500 $63.00
 

 

Tempfix™粘合标本安装套件

非常适用于颗粒状样品,例如粉末,颗粒,花粉,昆虫,干燥的样品和类似细粒

 

 

Tempfix™是一种非导电性热塑性热熔胶树脂,专门为SEM研究而配制。它不含溶剂,在高真空下稳定。其粘合特性出现在40-120°C范围内。熔融从40°C开始,在120°C变成稀薄的液体,显示宽的粘度范围。它具有非常光滑的表面,可用于SEM成像而不会干扰背景。

标本的准备需要加热板或加热块,10 x10 x 0.25mm的铝板用作标本架,金属冷却块和顶部带有侧面夹紧螺钉的销钉型标本支架。将铝片加热到约120°C,然后在其上施加少量Tempfix™并使其平滑。去除多余的树脂。片材冷却后,Tempfix™是坚固的光滑塑料表面。可以在固体塑料表面上撒上或涂上颗粒或其他小样品,然后将薄板缓慢加热至40°C以上至所需的粘度。使用温度控制粘度以及颗粒“沉入”粘合剂的距离。

取下薄板并在金属块上快速冷却。精致的标本可能不会受到热损伤。为了获得宜的成像效果,可能需要薄的导电涂层(溅射或蒸发)。带有样品的铝片可以用夹紧螺钉安装在提供的销钉安装适配器上,也可以用导电的碳粘片安装在特定的SEM安装件上。

16030 Tempfix™粘合剂套装

16026,1 品脱和16026-10,50克

PELCO ®高性能陶瓷胶

该PELCO ®高性能陶瓷胶粘剂是专门为高真空,高温和低温应用中的陶瓷,金属,石英和玻璃的粘结和密封而开发的。它是氧化铝在无机硅酸盐水溶液中的分散体。呈糊状,可以用刷子或抹刀轻松涂抹。在室温下数分钟内即可获得良好的机械强度。固化时间表为在93°C(200°F)下2个小时。固化后即可达到全部性能。它提供低电导率和热导率。有2种尺寸出售:盛有1品脱(473毫升)的容器或盛有50克(约22毫升)的容器。

 

优点:

  • 一个组件,易于使用的系统
  • 不含VOC或碳氢化合物的无机系统–兼容高真空
  • 宽温度范围–低温至1650°C(3000°F)
  • 高电阻和热电阻
  • 机械强度好
  • 高耐化学性
产品编号 描述 单元 价钱
16026 PELCO ®高性能陶瓷粘接剂,1品脱 $195.85
16026-10 PELCO ®高性能陶瓷胶50克 27.35
 

 

 

 

Mikrostik™胶粘剂

超薄粘性基底,透明,适用于其他粘合剂浸没的小颗粒。引用的应用包括有机粉末,花粉,种子-用于连接到SEM存根。可以用MEK稀释。快速干燥。非导电。

 

16033 Mikrostik™,14毫升

 

PELCO ® Pro的氰基丙烯酸酯胶超

所述PELCO ®临氰基丙烯酸酯基的瞬间或超级胶水是理想的修复,样品制备,组装和接合异种材料。透明,快速固化的氰基丙烯酸酯,无需混合或施加额外的热量。 
可提供带有5x2gr的小管套装,带分配器的20ml瓶或20gr分配器管。为了覆盖广泛的应用范围,提供了具有不同固化时间的不同粘度。 

氰基丙烯酸酯品牌交叉参考和技术数据

5 x 2gr的小管 20毫升瓶  

氰基丙烯酸酯胶(和环氧树脂)的货架期可以通过在较低的温度下保存来延长。-20℃。在较低的温度下,粘合剂变得非常粘,化学反应的速度实际上降低为零。它将使粘合剂稳定多年。使用前,将粘合剂融化并密封容器,以免凝结成粘合剂。 

 

PELCO ®专业版C100氰基丙烯酸酯胶

PELCO ®专业版C100 CA胶水有100CPS的粘度和4-10seconds的固化时间,明确的。用于将塑料,玻璃,陶瓷,橡胶粘合到表面中等光滑的金属上,不适用于多孔材料。通用型氰基丙烯酸酯胶。适用于许多应用。

 

产品编号 描述 单元 价钱
14460 PELCO ®专业版C100氰基丙烯酸酯胶,5x2gr $10.00
14470 PELCO ®专业版C100氰基丙烯酸酯胶,20毫升 10.00
 

 

PELCO ® Pro的F5氰基丙烯酸酯胶-低气味/低白化(磨砂)

PELCO ®临F5 CA胶是一个非常快的键合的氰基丙烯酸酯与5CPS的具有2-4秒,清晰的固化时间的粘度。适用于异种材料的高速粘合,具有光滑的表面和小的间隙(0.002英寸/ 50µm),具有优异的芯吸性能。不适合用于多孔材料。

 

 

14462 PELCO ® Pro的F5氰基丙烯酸酯胶,5x2gr

 

tedpella 导电胶带 16073 现货供应

世界*实验材料供应商 Ted Pella, Inc上海金畔生物为其中国代理, Ted Pella, Inc在一直是行业的*,一直为广大科研客户提供zui为的产品和服务,上海金畔生物一直秉承为中国科研客户带来的产品,的服务, Ted Pella, Inc就是为了给广大科研客户带来更加完善的产品和服务,您的满意将是我们zui大的收获

 Ted Pella, Inc中国代理, Ted Pella, Inc上海代理, Ted Pella, Inc北京代理,Ted Pella, Inc广东代理, Ted Pella, Inc江苏代理Ted Pella, Inc湖北代理,Ted Pella, Inc天津,Ted Pella, Inc黑龙江代理,Ted Pella, Inc内蒙古代理,Ted Pella, Inc吉林代理,Ted Pella, Inc福建代理, Ted Pella, Inc江苏代理,Ted Pella, Inc浙江代理, Ted Pella, Inc四川代理,

TedPella公司成立于1968年1月,由特德佩拉和克里斯廷佩拉共同创立。主要产品包括生命科学领域组织学,生物电子显微镜,超薄切片,免疫金染色法以及真空蒸发和材料科学。TedPella是*的微波处理技术的,TedPella致力为客户提供的产品和服务。

Ted Pella, Inc生产和供应显微镜设备和各种显微镜使用的附属产品,如用于透射电镜和扫描电子显微镜,电子探针分析,原子力显微镜,激光共聚焦显微镜和光学显微镜的附属用品。其产品广泛提供给各大院校研究所及相关的生命科学研究的机构。

Carbon Conductive Tapes, Double Coated

These carbon tapes are conductive and may be used conveniently for scanning electron microscopy or EDS applications. 
This is the same material as the PELCO Tabs™, Carbon Conductive Tabs, but in tape form. The tape form allows for special application uses such as custom sizes, cut-outs and shapes. The purity of this tape is identical to the PELCO Tabs™; only very small impurities of Al and Si may be found. 

Both sides of the tape have a thick conductive adhesive (conductive inner film is 35µm and the adhesive is 45µm on each side for a total of 125µm [5 mils]) with a white liner. The double adhesive and conductive design permits quick mounting of samples without using liquid or colloidal adhesives. 
The tape is relatively solid and non-porous and does not absorb small samples. The variety of widths affords efficient application to various specimen mount surface sizes. Thickness is 0.16mm. Available in four widths. Can be used down to -20°C (-4°F) and temperature maximum is 60°C (140°F). Available in 8, 12, 20, 25, and 50mm W x 20m L (.31, .47, .79, .98, and 1.96″ x 21.8 yd). Core diameter is 76mm (3″). SEM mounts not included. 

货号 描述 规格 品牌
16073 Carbon Tape, 8mm W x 20m L each TedPella
16073-1 Carbon Tape, 12mm W x 20m L each TedPella
16073-2 Carbon Tape, 20mm W x 20m L each TedPella
16073-4 Carbon Tape, 25mm W x 20m L each TedPella
16073-3 Carbon Tape, 50mm W x 20m L each TedPella

 

tedpella 导电胶带 16073  大量现货

 

 

 

单面铜镍导电胶带


单面铜镍导电胶带

简要描述:SEM用导电胶带,镍颗粒嵌在粘结剂中。
总厚度:0 .075 mm (3.0 mil)
粘结剂厚度:0.040mm (1.6 mil)
基底材质:压延铜箔
导电物质:镍粉

详细介绍

产品咨询

 

SEM用导电胶带,镍颗粒嵌在粘结剂中。
总厚度:0 .075 mm (3.0 mil)
粘结剂厚度:0.040mm (1.6 mil)
基底材质:压延铜箔
导电物质:镍粉
产品编号
产品名称
规格
产地
16067
单面铜镍导电胶带
8mm×20m
美国
16072-1
单面铜镍导电胶带
20mm×20m
美国

 

 

Conductive Adhesives Tabs, Tapes and Sheets
Carbon, Aluminum, Copper, Silver

Conductive Adhesives for Scanning Electron Microscopy

 

PELCO Tabs™ Carbon Conductive Tabs, Double Coated
PELCO® Image Tabs
Carbon Conductive Tape, Double Coated
Conductive Tabs
“Spectro Tabs”, higher purity conductive carbon tabs
Lift-N-Press Tabs, Double Sided
Carbon Conductive Tapes, Double Coated
3M™ XYZ Axis Electrically Conductive, Double Sided Tape, 9712 and 9713
3M™ Copper Conductive Tapes, Single Adhesive Surface
3M™ Copper Conductive Tape, Double Coated
Copper Tape with Nickel, Single Adhesive Surface
3M™ Aluminum Conductive Tape, Single Adhesive Surface
Carbon Conductive Adhesive Sheet, Double Adhesive Coated
Silver Conductive Adhesive Sheet, Double Adhesive Coated
 

Technical Information about Conductive Carbon Tabs (PDF 958KB)

 

PELCO Tabs™ Carbon Conductive Tabs, Double Coated

new types added
The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible.

Application of the tab to a mount or surface should be done slowly and carefully to maintain surface smoothness.

The conductive adhesive is a carbon filled acrylic, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol, alcohols or our 3M™ Adhesive Remover 80924 which is solvent-free. Temperature maximum is 60°C (140°F). Small impurities of Si, Sb, S and very small impurities of Fe, Mg and Na can be found.
 

This product may also be used for gunshot residue analysis.
Many laboratories use these tabs for SEM in a large diversity of applications. Refrigeration will increase shelf life but a warm up period of one hour is then required before use.
(Use Spectro Tabs where a purer composition is required.) MSDS New – Now Available in 4 sizes
 

Prod # Description Unit Price Order / Quote
16084-6
PELCO Tabs™, Carbon Conductive Tabs, 6mm OD
pkg/100
$14.50

Qty:
16084-3
PELCO Tabs™, Carbon Conductive Tabs, 9mm OD
pkg/98
14.50

Qty:
16084-1
PELCO Tabs™, Carbon Conductive Tabs, 12mm OD
pkg/100
14.50

Qty:
16084-2
PELCO Tabs™, Carbon Conductive Tabs, 25mm OD
pkg/54
29.90

Qty:

 

“Spectro Tabs”EDX analysis clearly shows a higher purity surface for those applications that require critical composition study.
 

when you need higher purity carbon

A need existed for a tab with a purer composition in situations such as X-ray analysis. The

Prod # Description Unit Price Order / Quote
16084-4
Spectro Tabs, higher purity conductive carbon tabs,12mm O.D.
pk/120
$31.00

Qty:

PELCO Image Tabs™, 260µm (10mil) Carbon Conductive Tabs, Double Coated

Back by popular demand, the thicker PELCO Image Tabs™ is a return to the stiff 260µm (10mil) thick smooth conductive tab. Though not as conductive or sticky as the current 10mil PELCO Tabs™, PELCO Image Tabs™ are suitable as a photographic background and are repositionable. This tab is also suitable for Jet Scan applications where the tab must be removed and archived. The PELCO Image Tab’s™ surface is less prone to bubbling and cracking when metal coated under vacuum and thus better than the 125µm (5mil) PELCO Tab™ as a photographic background for small particles like pollen and insect parts.

Both sides of the 200µm thick conductive polycarbonate base have 30µm thick conductive adhesive. Total thickness is 260µm with a liner on both sides. Protection for handling, storage and shipping is provided on one side by the transparent liner sheet and on the other side by the white liner cover.

The conductive adhesive is a carbon-filled acrylic, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol, alcohols or our 3M™ Adhesive Remover 80924 which is solvent-free. Temperature maximum is 60°C (140°F). Small impurities of Ni, Cu, Si, Sb, S, Na, P and very small impurities of Fe and Mg can be found. Refrigeration will increase shelf life but a warm-up time of 1 hour is then required before use.

Prod # Description Unit Price Order / Quote
16084-20
PELCO Image Tabs™, Carbon Conductive Tabs, 12mm OD
pk/100
$16.50

Qty:

Carbon Conductive Tape, Double Coated

Both sides of the 200µm thick conductive polycarbonate base have 30µm thick conductive glue. Total thickness is 260µm.
Protection for handling, storage and shipping is provided on one side by the 25µm thick, transparent liner and on the other side by the 40µm thick, white liner.
The conductive adhesive is a carbon–filled acrylic glue, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol or alcohols. Temperature maximum is 60°C (140°F). Small impurities of Cu, Si, Sb, S, Na, P and very small impurities of Fe and Mg can be found. Refrigeration will increase shelf life but a warm-up time of 1 hour is then required before use. Sizes are 12mm and 25mm W x 5m L (1/2″ and 1″ x 5.46 yd) with a core diameter of 76mm (3″). Also available in sheet form: 65 W x 300mm L (2.5″ x 11.8″).

Please observe that 16084-9 carbon conductive tape, 65mm wide, might be applied for particle collection and analysis in clean rooms or other purposes.
 

Prod # Description Unit Price Order / Quote
16084-7
Carbon Conductive Tape, 12mm W x 5m L
each
$78.40

Qty:
16084-8
Carbon Conductive Tape, 25mm W x 5m L
each
78.40

Qty:
16084-9
Carbon Conductive Tape in sheet form, 65mm W x 300mm L
each
25.50

Qty:

Conductive Lift-N-Press Adhesive Tabs, Double Sided

Composed of a thin film of strong conductive adhesive approx. 1/2″ (12.7mm) dia.; >99% transparent to EDS, with 0.6% nickel and <0.3% copper content. To apply, place “Press” portion of tab on SEM mount surface, lift “Lift Off” tab and peel, slightly rotating tab when lifting. Can be cut to size as desired.
 

Prod # Description Unit Price Order / Quote
16083
Conductive Lift-N-Press, roll/250
each
$41.50

Qty:

 

Carbon Conductive Tapes, Double Coated

These carbon tapes are conductive and may be used conveniently for scanning electron microscopy or EDS applications.
This is the same material as the PELCO Tabs™, Carbon Conductive Tabs (top of page), but in tape form. The tape form allows for special application uses such as custom sizes, cut-outs and shapes. The purity of this tape is identical to the standard tab form at top of page.
 

Both sides of the tape have a thick conductive adhesive (conductive inner film is 35µm and the adhesive is 45µm on each side for a total of 125µm [5 mils]) with a white liner. The double adhesive and conductive design permits quick mounting of samples without using liquid or colloidal adhesives.
The tape is relatively solid and non-porous and does not absorb small samples. The variety of widths affords efficient application to various specimen mount surface sizes. Thickness is 0.16mm. Available in four widths. Can be used down to -20°C (-4°F) and temperature maximum is 60°C (140°F). Available in 8, 12, 20 and 50mm W x 20m L (.31, .47, .79 and 1.96″ x 21.8 yd). Core diameter is 76mm (3″).

Prod # Description Unit Price Order / Quote
16073
Carbon Tape, 8mm W x 20m L
each
$27.25

Qty:
16073-1
Carbon Tape, 12mm W x 20m L
each
45.45

Qty:
16073-2
Carbon Tape, 20mm W x 20m L
each
67.25

Qty:
16073-3
Carbon Tape, 50mm W x 20m L
each
134.55

Qty:

 

 

SEM micrograph of fiber in adhesive

magnified view of fibers

3M™ XYZ Axis Tape, Electrically Conductive, Double Sided, 9712 and 9713

This highly conductive double sided tape with excellent adhesion and conductivity properties has been initially developed for bonding EMI/RF shields.  Advantages of this new tape are:

  • Improved adhesion – creates a solid bond and allows attachment of dissimilar materials
  • Easy handling – more solid tape, conductive fibers reinforced and easier to remove
  • High conductivity – creates solid electrical connections

Due to the high electrical conductivity and excellent bonding properties these tapes are ideally suited for bonding conductive samples on SEM specimen mounts or directly on SEM specimen holders. They can be used under clean room conditions. The conductive nickel fibers extend above the adhesive ensuring a solid electrical connection between parts. It is less suitable for mounting small or powder like specimen due to the fibers in the adhesive and the topographic surface. Type 9713 has less resistance than Type 9712, see chart below:

 

Resistance Comparison Between Type 9712 and Type 9713
Substrate
Tested
Aluminum/
Aluminum
Aluminum/
Stainless Steel
Copper/
Aluminum
Copper/
Copper
Type 9712 <24Ω <21.5Ω <16Ω <.66Ω
Type 9713 <2.5Ω <2.0Ω <1.0Ω <0.5Ω
Based upon four wire (Kelvin probe) resistance measurements made with crossed pieces of Foil/Type 9712 or 9713/Rigid plate construction using a 1.0″ x 1.0″ square piece of 3M tape Type 9712 or 9713. The rigid metal surface was prepared with a Scotch-Brite™ pad to roughen the surface and cleaned with isopropyl alcohol.

XYZ highly conductive tape comes on a 76mm (3″) plastic core and sizes for Type 9712 are 6.35mm, 12.7mm and 25mm W x 32.9m L (1/4″, 1/2″ and 1″ x 36 yd) and for Type 9713 is 12.7mm, 25mm, and 100mm W x 32.9m L (1/2″, 1″, and 4″ x 36 yd), .61m W x 98.6m L (24″ x 108 yd), .61m W x 32.9m L (24″ x 36 yd).

Thickness: 0.127mm (5 mil). The tape adhesive can be removed relatively easily by pulling off, rubbing or by application of packaging tape over the residual adhesive. Adhesive can be dissolved in acetone.
MSDS (PDF 24KB)
Technical Note, 16081,16081-2,16081-4 (PDF 23KB)
Technical Note, 16081-82, -83, -89 (PDF 48KB)

Prod # Description Unit Price Order / Quote
16081
3M™ Type 9712 XYZ Axis Electrically Conductive, Double Sided Tape, 6.35mm W x 32.9m L
each
$24.70

Qty:
16081-2
3M™ Type 9712 XYZ Axis Electrically Conductive, Double Sided Tape, 12.7mm W x 32.9m L
each
37.05

Qty:
16081-4
3M™ Type 9712 XYZ Axis Electrically Conductive, Double Sided Tape, 25mm W x 32.9m L
each
61.75

Qty:
16081-82
3M™ Type 9713 XYZ Axis Electrically Conductive, Double Sided Tape, 12.7mm W x 32.9m L
each
64.75

Qty:
16081-83
3M™ Type 9713 XYZ Axis Electrically Conductive, Double Sided Tape, 25mm W x 32.9m L
each
102.95

Qty:
16081-85
3M™ Type 9713 XYZ Axis Electrically Conductive, Double Sided Tape, 100mm W x 32.9m L
each
411.70

Qty:
16081-89
3M™ Type 9713 XYZ Axis Electrically Conductive, Double Sided Tape, 0.61m W x 98.6m L
each
P.O.R.

Qty:
16081-22
3M™ Type 9713 XYZ Axis Electrically Conductive, Double Sided Tape, 0.61m W x 32.9m L
each
2,471.50

Qty:

 

3M™ Z Axis Tape, Electrically Conductive, Double Sided, 9703

This is a double sided tape with high electrical conductivity. The adhesive is filled with silver coated nickel particles which results in a contact resistance of less than 0.5 ohms through the adhesive layer. Tape has low outgassing and yields excellent bonding of flat and electronic assembly applications. Use at room temperature, no thermal bonding required. Standard plastic core of 76mm (3″). thickness of liner is 0.1mm, adhesive 0.05mm.
MSDS (PDF 23KB)
Technical Note, 16081-10, 16081-11 (PDF 64KB)

Prod # Description Unit Price Order / Quote
16081-10
3M™ Z-Axis Electrically Conductive, Double Sided, 9703 Tape, 6.35mm x 32.9m (1/4″ x 36yrds)
each
$57.60

Qty:
16081-11
3M™ Z-Axis Electrically Conductive, Double Sided, 9703 Tape, 12.7mm x 32.9m (1/2″ x 36yrds)
each
86.45

Qty:

 

MSDS (PDF 11KB)

3M™ Copper Conductive Tapes
Single Adhesive Surface

The tape is easily cut to size and may be quickly applied to a specimen mount or other surface. Carbon or metallic coating normally is applied to the sample and mount. An electrical discharge bridge is then completed from sample, through the copper and its conductive glue to the grounded specimen mount.
The tape is dead soft copper with a conductive acrylic adhesive. It is supplied on a removable liner for easy handling and cutting. The tape offers excellent conductivity through the foil backing.
This tape is 6.3mm W x 16.46m L (1/4″ x 18 yd) or 12.7mm W x 16.46m L (1/2″ x 18 yd) and the core diameter is 76mm (3″).

Foil Thickness: 0.04mm (.0016″)
Total Thickness: 0.07mm (.0028″)
Resistance through Adhesive: 0.005 ohm

Technical Note, 16072 (PDF 63KB)

Prod # Description Unit Price Order / Quote
16072
3M™ Copper Conductive Tape, 6.3mm W x 16.46m L (1/4″ x 18 yd)
each
$18.10

Qty:
16072-1
3M™ Copper Conductive Tape, 12.7mm W x 16.46m L (1/2″ x 18 yd)
each
41.25

Qty:

 

3M™ Copper Conductive Tape, Double Coated

This tape retains the features of the #16072, while enabling the investigator to attach objects directly to the top surface of the tape. The adhesive is conductive. The tape is useful, for example, in attaching insects for SEM investigation. Dimensions are 12.7mm W x 16.4m L (1/2″ x 18 yd). Core diameter is 76mm (3″).
Foil thickness: 0.04mm (0.0016″)
Total thickness: 0.09mm (0.0035’)
Resistance through adhesive: 0.010 ohm

Technical Note, 16074 (PDF 63KB)

Prod # Description Unit Price Order / Quote
16074
3M™ Copper Conductive Tape, Double Coated, 12.7mm W x 16.4m L
each
$43.25

Qty:

Heavy Duty Tape Dispenser

 

Copper Tape, with Nickel
Single Adhesive Surface

SEM conductive tape, electrically conductive with a clean, smooth background. Nickel is embedded in the adhesive. Overall thickness is .075 mm (3.0 mil), adhesive is 0.040mm (1.6 mil). Conductive resistivity is 0.004 ohm/square. Available in 8 and 20mm W x 20m L (.315″ and .787″ x 21.9 yrd). Core diameter is 76mm (3″).

MSDS (PDF 11KB)
 

Prod # Description Unit Price Order / Quote
16067
Copper/Nickel Tape, 8mm W x 20m L
each
$35.00

Qty:
16067-1
Copper/Nickel Tape, 20mm W x 20m L
each
58.70

Qty:

 

3M™ Aluminum Conductive Tape
Single Adhesive Surface

single coated conductive smooth surface

Scotch® 1170 tape is dead soft aluminum, is easily cut to size and may be quickly applied to a specimen mount or other surface. Carbon or metallic coating normally is applied to the sample and mount. An electrical discharge bridge is then completed from sample through the aluminum and its conductive acrylic glue to the grounded specimen mount. Foil Thickness: 0.05 mm (2.0 mil). Total Thickness (foil + adhesive): 0.081mm (3.2 mil). Electrical Resistance through adhesive: 0.010 ohm. Available in: 6.3mm, 12.7mm and 25.4mm W x 16.4m L (1/4″, 1/2″ and 1″ x 18 yrd). Core diameter is 76mm (3″).

Technical Note, 16071, 16071-1 (PDF 64KB)

Prod # Description Unit Price Order / Quote
16071
3M™ Aluminum Conductive Tape, 6.3mm W x 16.4m L
each
$19.75

Qty:
16071-1
3M™ Aluminum Conductive Tape, 12.7mm W x 16.4m L
each
36.75

Qty:
16071-2
3M™ Aluminum Conductive Tape, 25.4mm W x 16.4m L
each
74.50

Qty:

 

Carbon Conductive Sheet, Double Adhesive Coated

This electrically conductive sheet is suitable for cutting and sizing to samples, with application to SEM Energy Dispersive Spectrometry (EDS) X-ray studies. This product provides little out-gassing under vacuum. It won’t absorb or penetrate specimens, as liquid adhesives might. Sheet size: 50mm W x 120mm L x 0.16mm thick (1.97″ x 4.72″ x 6.3 mil)

Prod # Description Unit Price Order / Quote
16085-1
Carbon Conductive Sheet, 50 x 120mm
pkg/10
$39.75

Qty:

 

Silver Conductive Sheet, Double Adhesive Coated

This highly electrically conductive sheet is suitable for cutting and sizing to samples, with application to SEM and conductive pads.

Highly conductive: Resistance only 0.002 ohm/5×5 square.

Little outgassing under vacuum. Will not absorb or penetrate specimens, as liquid adhesives might. Silver Sheet Size: 50mm W x 120mm L x 0.125mm thick (1.97″ x 4.72″ x 5 mil).
 

Prod # Description Unit Price Order / Quote
16086-1
Silver Conductive Sheet, 50 x 120mm
pkg/5
$320.00

Qty:

 

双面碳导电胶带


双面碳导电胶带

简要描述:双面碳导电胶带是碳粉填充的丙烯酸胶。总厚度为0.26mm,聚碳酸酯基底厚0.2mm。可用乙酸乙酯,乙醇,异丙醇清除。Z高使用温度:60℃。微小杂质:Cu,Si,Sb,S,Na,P,Fe,Mg。

详细介绍

产品咨询

产品名称:双面碳导电胶带 编号:FP16084    
 

双面碳导电胶带是碳粉填充的丙烯酸胶。总厚度为0.26mm,聚碳酸酯基底厚0.2mm。可用乙酸乙酯,乙醇,异丙醇清除。zui高使用温度:60℃。微小杂质:Cu,Si,Sb,S,Na,P,Fe,Mg。

产品编号
产品名称
规格
产地
FP16084-7
12mm×5m
美国
FP16084-8
25mm×5m
美国
FP16084-9
65mm×300m
美国

3M双面XYZ三维导电胶带 


3M双面XYZ三维导电胶带 

简要描述:3M双面XYZ三维导电胶带粘接性良好,固体胶带可粘附粘接各种材料样品,易于操作,胶带中包覆有导电纤维,并且容易去除,高导电性,添加了导电镍纤维,镍纤维在XYZ方向上均匀分布,使得在整个空间方向上都具有较高的电导率。9713较9712导电性更好。

详细介绍

产品咨询

 

3M双面XYZ三维导电胶带粘接性良好,固体胶带可粘附粘接各种材料样品,易于操作,胶带中包覆有导电纤维,并且容易去除,高导电性,添加了导电镍纤维,镍纤维在XYZ方向上均匀分布,使得在整个空间方向上都具有较高的电导率。9713较9712导电性更好。

品编号
产品名称
规格
产地
16081
3M双面XYZ三维导电胶带
9712型,6.35mm×32.9m
美国
16081-2
9712型,12.7mm×32.9m
美国
16081-4
9712型,25.4mm×32.9m
美国
16081-82
9713型,12.7mm×32.9m
美国
16081-83
9713型,25.4mm×32.9m
美国