This product is a bacteriophage T7 RNA polymerase derived from recombinant protein expression in Escherichia coli. It catalyzes the 5'→3' synthesis of RNA on double-stranded DNA from its T7 promoter sequence (5'-TAATACGACTCACTATAG*-3') and uses NTPs as substrates. The DNA with double-stranded linear blunt ends or 5'protruding ends can be used as templates for T7 RNA polymerase, so linearized plasmids and PCR products can be used as templates for in vitro synthesis of RNA.

Note: G* is the first base of the RNA transcript.

This product is produced in accordance with GMP regulations, and provided in liquid form. 

 

Product Properties

Source	Recombinant E. coli with T7 RNA Polymerase gene
Optimum Temperature	37℃
Storage Buffer	50 mM Tris-HCl, 1 mM EDTA, 10 mM DTT, 100 mM NaCl, 0.1% Triton X-100，50% (v/v) glycerin，pH7.9@25℃
Unit Definition	The amount of enzyme required to incorporate 1 nmol of [3H] GMP into the acid-insoluble precipitate within 1 hour at 37°C and pH 8.0 is defined as 1 unit.

 

Contents

Contents No.	Name	Catalog No./Specification
		10625ES10 (10 KU)	10625ES60 (100 KU)	10625ES86 (2,500 KU)	10625ES96 (25 MU)	10625ES99 (100 MU)
10625	T7 RNA polymerase (250 U/μL)	40 μL	400 μL	10 mL	100 mL	400 mL

【Note】This product does not contain 10×Transcription Buffer (Cat#10627).

 

Applications

1. Single-stranded RNA synthesis (including mRNA, siRNA, gRNA and other RNA precursors, as well as isotope-labeled or non-isotope-labeled RNA probes).

2. Synthesis of capped mRNA using cap analogs.

 

Shipping and Storage

T7 RNA Polymerase GMP-grade products are shipped with dry ice and can be stored at -15℃ ~ -25℃ for one year.

 

Experimental methods

I. In vitro transcription without cap–analog

1. Combine the following reaction components:

Component	Volume（μL）	Final concentration
10× Transcription Buffer	2	1×
CTP / GTP/ ATP/ UTP (100 mM each)	2 each	10 mM each
T7 RNA Polymerase (250 U/μL)	1	–
Pyrophosphatase, Inorganic (1 U/μL)	0.04
RNase inhibitor (40 U/μL)	0.5	–
RNase free H2O	Up to 18	–
DNA template	2 (100 ng-1 μg)	–

Note: 1) The DNA template should be added last, because the 10×Transcription Buffer contains high concentration of spermidine, which may cause precipitation of DNA templates.

2) It is recommended to keep the buffer and water at room temperature before use. The reaction mix should be prepared at room temperature because spermidine will cause precipitation of high-concentration DNA templates at low temperature.

3) If the transcript is less than 100 nt, the templates should be increased to 2μg.

4) If you need RNase inhibitor (40 U/μL), please purchase our company's product cat#10621.

5) If you need Pyrophosphatase, Inorganic (1 U/μL), please purchase our company's product cat#10620.

6) In order to ensure effective transcription of a specific region, it is recommended to cut the DNA template downstream region into blunt ends or 5'protruding ends.

2. Incubate at 37°C for 2-4 h ( if the transcript is less than 100 nt, increase the incubating time to 4-8 h).

3. After the reaction, add 2U DNase I (Cat#10611) and incubate at 37°C for 15-30 min to degrade the DNA template.

4. Purification of transcripts: RNA Cleaner magnetic beads(Cat#12602) can be used for purification of transcription products via removing proteins, salt ions and other impurities. Phenol/chloroform purification method can also be used (the specific steps can be obtained by contacting Yeasen).

II. In vitro transcription with cap1-analog

1. Combine the following reaction components:

Component	Volume（μL）	Final concentration
10× Transcription Buffer	2	1×
CTP / GTP/ ATP/ UTP (100 mM each)	2 each	10 mM each
Cap1-analog (100 mM each)	2 each	10 mM each
T7 RNA Polymerase (250 U/μL)	1	–
Pyrophosphatase, Inorganic (1 U/μL)	0.04
RNase inhibitor (40 U/μL)	0.5	–
RNase free H2O	Up to 18	–
DNA template	2 (100 ng-1 μg)	–

【Note】If you need Cap1-analog, please contact our company.

2. Incubate at 37°C for 2-4 h.

3. After the reaction, add 2U DNase I (Cat#10611) and incubate at 37°C for 15-30 min to degrade the DNA template.

4. Purification of transcripts: RNA Cleaner magnetic beads(Cat#12602) can be used for purification of transcription products via removing proteins, salt ions and other impurities. Phenol/chloroform purification method can also be used (the specific steps can be obtained by contacting Yeasen).

 

Notes

1. Types of DNA templates: It is recommended to use linearized plasmids or PCR products containing T7 promoters as templates.

2. The purity of the DNA template will significantly affect the yield of in vitro transcription. Residual RNase during the plasmid DNA extraction process will significantly affect the quality of transcribed RNA. Plasmid DNA template are recommended to be extracted by phenol-chloroform; PCR products are recommended to be purified by gel.

3. For your safety and health, please wear personal protective equipment (PPE), such as laboratory coats and disposable gloves, when operating with this product.

 

HB230406

Q: T7酶的保真性能怎么样？有没有开展相关测试？

A: 我们的T7酶测试了相对保真度，与Thermo的保真度差不多，大概万分之四的突变率。目前野生型的T7保真度都差不多，基本能满足客户的需求。现项目中没有更高保真度T7的开发计划。

Q: 使用T7聚合酶的产量是使用LiCl纯化后进行测定的吗？有没有A260/280和A260/230的数据？

A: 是通过LiCl纯化后进行测定的，我们有记录过相关数据A260/280大概比值再在2.0-2.1之间；使用我们的羧基磁珠纯化也基本在这个范围以内。具体数据可以整理之后再分享。

Q: 采用T7聚合酶转录的时候，有没有什么办法，减少polyA尾多转录的问题？

A: 这一情况是T7反应体系的自身特性，无法完全避免。根据相关的文献，控制mRNA自延长的思路主要还是两方面：

①对模板3'末端上游序列进行优化；

②控制IVT产量，高产量下自我延伸的几率会更高